35 Ford Hot Rod Truck Build

Worked with a consultant to try and work out the ECU issues on startup. Was determined we had the wrong software. After :30 minutes or...

Installed the hood louvers, blind nuts in the hood for the latches and hinges. Put the hood hinges together. 2 hrs

Day 98-101  Completed the design and build on the bed floor. Used Coke, Pepsi and RC Cola wood beverage crates along with aluminum red...

Day 96-97 August 22-23  Assembled taillight assembly, painted the mounts, replaced wires, added wires, modified the blub holder fixture...

Finally received my replacement ECU from FiTech after several calls, engine still won’t run using the ECU  Works fine when the ignition...

3 days working on doors, weatherstrip and power windows set up. More modifications to brackets and non-existing wiring harness for...

Day 82  May 22 Trimmed passenger door to fit the body. Not sure why this is necessary – doors should have been molding correctly to fit...

Months of working on the engine trying to get it to start, frustration and near quitting the EFI set up. Not counting this towards the...

Day 71  Jan 25  Connected the injectors, oil pressure sender, alternator, IMAC, IAC, mounted a sender, made new braided fuel lines and...

Jan 16   Finally received my replacement intake and it to is damaged. Two of the eight hours or bent, the box wa s badly damaged, not...

Day 61     Oct 26  Installed thermostat and housing. Worked on the intake, with plugs and vacuum connectors we need. Added the FiTech...

Day 56-57  Oct 16-17 Worked two days on installing the seats. More than a headache. Still have the Drivers seat to finish with the new...

Day 51   Sep 23  Page 275  Put together the E-Brake and mounted it in the truck. Clevises’ don’t work with my cables. Looking for new...

Day 46 Sep 10 Installed the driveshaft with the new flange, fits perfect. Checked-in the new downdraft EFI System. Day 47  Sep 11  ...

Day 36    Aug 23  Spent the morning trying to get a new driveshaft for FFR after returning the wrong one they sent. Received my headers,...

Day 31    Aug 17  Moved the truck outside  and installed engine and transmission. Took awhile to get the trans mated to engine. Bolt...

Day 26    Aug 11 Bled the brakes with the power bleeder. Found I had a few loose fittings. But, once everything was tightened up – very...

Day 21 Aug 3  Page 184 Finished the Steering linkage, had to cut 1 ¼” of one of the shafts to make them work. Completed running lines to...

Day 15 Packaged and returned FFR Optional Brakes that wouldn't work. FFR is going to refund my money. Reinstalled the old Rear Caliper...

Day 12 Jul 15 Talked with FFR Rep about issues with instructions, fitment, shocks and rear calipers. Optional brakes won't work with...